Pubblicato in: Altro in Lituania | Inviato: |
Screw conveyor "KPH/1" (hereinafter referred to as "Equipment") is intended for loading (feeding) walnuts into the hopper of the machine for calibrating walnuts. The equipment is also suitable for loading (feeding) of hazelnuts, chestnuts, etc.
- depends on the rotational speed of screw and ranges from 250 to 1200 kg / h.
Rotational speed of screw is regulated from 0.23 to 30 rpm.
Torque on the shaft: 264 (N⋅m)
Power supply parameters: voltage (380 ± 22) V, frequency (50 ± 1) Hz;
Power consumption: not greater than 4 kW;
Dimensions: 4500 x 2500 x 1100 mm (dimensions may vary depending on the needs of the Customer in terms of the volume of the hopper, the height of the calibrator, etc.);
Weight: up to 500 kg, depending on the agreed sizes of the hopper.